5000 & 5000V Series - Details

5000 & F5000 Series 5000V & F5000V Series Selector Chart
 
Lever Design Pull Design Fire Exit Hardware
Strikes    

5000 & F5000 Series

Back to top

Dimensions

Back to top

Touchbar height to finished floor 41″ (1043mm) at center
Touch bar projection - neutral 2 1/2″ (64mm)
Touch Bar Projection - depressed 1 3/4″ (45mm)
center case 5 1/8″ x 2 3/4″ x 2″ (129mm x 69mm x 52mm)
Device length - Short 3′ (914mm) 2′2″ x 3′ (840mm to 914mm) door size

Minimum Stile Requirements

Back to top

4″ escutcheon trims & 4 1/2″ for thumbpiece and rose trims.

Double Door   –  4 1/2″ Min. Stile


239 Strike  –  418 Mullion


239 Strike  –  424 Mullion
                          4 5/8″ Min. Stile

Single Door  –  4 1/2″ Min. Stile

5000V & F5000V Series

Back to top

Dimensions

Back to top

Touchbar height to finished floor 41″ (1043mm) at center
Touch bar projection - neutral 2 1/2″ (64mm)
Touch Bar Projection - depressed 1 3/4″ (45mm)
center case 5 1/8″ x 2 3/4″ x 2″ (129mm x 69mm x 52mm)
Device length - Short 3′ (914mm) 2′2″ x 3′ (840mm to 914mm) door size
panic grade top & bottom latch case 3 15/16″ x 2 1/8″ x 1 3/8″ (100mm x 52mm x 42mm)
Fire Grade top latch case 3 15/6″ x 2 11/16″ x 2 1/16″ (100mm x 68mm x 53mm)
Fire grade Bottom latch case 3 15/16″ x 2 1/8″ x 1 3/8″ (100mm x 52mm x 42mm)
Top and bottom rod length for 36″ x 84″ doors top rod 43 1/4″ (1100mm), bottom rod 37 3/4″ (960mm)
vertical rods 1/2″ (13mm) round tubing

Minimum Stile Requirements

Back to top

Double door - with two vertical rod type exit devices.


3 1/2″ Min. Stile

Selector Chart

Back to top

Single Door Pairs of Doors without Mullion

Vertical Rod Type or Rim Type
2 Vertical Rod Type
Surface applied 2 point lock. Surface application. Surface applied 2 point locking both doors. Each door active same direction. Do not use with overlapping astragal.
Pairs of Doors with Mullion Pairs of Doors without Mullion

2 Rim Type With Mullion
1 Vertical Rod and 1 rim Type
Two independent active doors with full double door openings when required. Same direction. Both devices are surface applied. A coordinator and overlapping strike is recommended.
Pairs of doors without Mullion Handing

2 Vertical Rod type
Double egress surface applied. 2 point locking both doors opposite directions.

Lever Design

Back to top

Lever Design Knob Design
  • Non handed Grade 2 (Optional Clutch)
  • Tubular body hardened steel heavy duty tailpiece.
  • For 1 3/4″ doors. Available for fire and non fire rated rim and vertical rod exit devices.
  • Rose diameter 3″, lever length 4 3/4″. Fits and covers 161 cutout.
  • Non handed Grade 2
  • Tubular body hardened steel heavy duty tailpiece.
  • For 1 3/4″ doors. Available for fire and non fire rated rim and vertical rod exit devices.
  • Rose diameter 3″. Fits and covers 161 cutout.
  • 8000/L  - Entrance
    • Key retracts latchbolt, unlocks lever.
    • ANSI Function - 08
  • CLU5000L  - Clutch Free Wheeling (Entrance)
    • Key operates latchbolt, unlocks lever.
    • ANSI Function - 08
  • 8000/S - Storeroom

    • Key operates lever, otherwise always locked.
    • ANSI Function - 04
  • 8000/PAS - Passage

    • Lever always operable and free
    • ANSI Function - 15
  • 8000/DUM - Dummy

    • Dummy trim. One sided.
    • ANSI Function - 10

Keyway

Standard 6-pin “C” keyway. Also available in Schlage C-K, Russwin D!, Corbin 60, Sargent LA, Falcon/Weiser E, Arrow, Yale GA, Yale 8, Kwikset. Can also accept Medeco, Assa and Kaba high security cylinders.
  • 8000/K  - Entrance
    • Key retracts latchbolt, unlocks knob.
    • ANSI Function - 08

Pull Design

Back to top

5000 NL 5000 DTP 5000 EOP
  • For Rim Devices Only
  • Outside by pull and key.
  • Key retracts latchbolt.
  • ANSI function - 03
  • Covers 161 cutout.
  • Outside by pull only.
  • Pull when dogged.
  • ANSI Function - 02
  • Covers 161 cutout
  • Outside by plate only.
  • ANSI function - 10
  • Covers 161 cutout.
Finishes - Powder coated aluminum (alum).

Fire Exit Hardware

Back to top

Fire Exit Hardware UL Fire Door Rating
Application Model # Maximum Door Opening ( A ) 3 Hour
Single Doors
Rim Type		 F5000EO36 3′ 0″ x 7′ 0″ X
Pairs of Doors
Two surface mounted standard vertical rod type or less bottom rod (LBR) Application. Prefix LBR before Part #

a) Swinging in same direction
b) Swinging in opposite Direction (Double Egress)

 F5000V3684
X
F5000V3684		 6′ 0″ x 7′ 2″ X
F50000V3696
X
F50000V3696 		6′ 0″ x 7′ 2″ X
Pairs of Doors
Two rim type with mullion		 F5000EO36 6′ 0″ x 7′ 2″ X
All fire rated exit devices in all applications, are also labeled for (B) 1-1/2 hour, (C) 3/4 hour, (D) 1 hour, (E) 3/4 hour. All fire exit hardware meet UL10C and UBC 7-2-1997 codes.

Strikes

Back to top

(All Strikes are black nylon coated)

For use with 5000V Vertical Rod Exit Device


221
Standard for 5000V. Applied to surface of floor or to a flat threshold. Standard packaging.


227
Applied to surface of stop. No mortise required. Standard packaging.


233
Bottom strike. Alternate bottom strike. Flush mounting stainless steel. Furnished with expansion shields. Requires mortise in the floor.

For use with 5000 Rim Type Exit Device


239
For 5000 surface applied. Standard Packaging.

Overlapping Strike


251
Surface applied. Used on inactive leaf for device on active leaf of pair of doors without mullion.

 For use with F5000V Vertical Rod Fire Rated Exit Device


245
Surface applied for F5000V. Standard packaging.


233
Bottom strike for F5000V. Flush mounting stainless steel. Furnished with expansion shields. Required mortise in the floor. Standard packaging.

For use with F5000 Rim Fire Exit Device


245
For F5000 surface applied. Standard Packaging.

Additional Strikes


LFF
Lock Front Filler.


SF
Strike Filler
Accessories
Mullions

Lockable and electric lockable mullions are available on request. 


418 - Removable mullion Aluminum painted ( Prime coat) includes top and bottom retainer supplied as a stock 96″ for non fire rated applications.


424 - Fire exit mullion. 2″ x 3″ steel tubing round corner, iron construction with iron top and bottom retainers. To be used with two rim type devices on two independent active doors with full double door openings.